AXLEYARD
Loadoll II Rollback Carrier trailer
Landoll Trailers

Loadoll II Rollback Carrier

Features

Capacity

10 Ton

Deck Height

10"

Axles

2-Axle

About This Trailer

Landoll manufactures rollback carriers to fit a variety of needs including transporting containers and transporting farm equipment, tractors, and forklifts. A 20,000 lbs. capacity rollback is available for your container transporting needs. With the addition of an optional Chain Drive System, you have the ability to power load and unload storage containers. The 12,000 lbs. gearbox and 1/2″ chain is the perfect combination for all types of containers. * Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations. * Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations. Specifications subject to change without notice. 800-428-5655 moc.llodnal@selasreliart

Full Specifications

Hydraulics
Dual Hydraulic ControlsBoth sides of Bed, Lighted
Dual Lift CylindersSingle Cylinder Bed Slide
Winch12,000 lbs. Planetary with Spring Tension, Control at side of Bed, 1/2″ x 85′ Cable with 1/2″ Grab Hook
Winch Area StorageArea beside Winch is flat; No open Storage
Hydraulic StabilizerIndependent Dual Cylinder Dock Stabilizer (Hydraulic Adjust) (4,000 lbs. vertical, 15,000 towing capacity; no hitch Standard)
Hydraulic Valve Body3 Spool Rexroth, 2500 PSI / 14-17 GPM, Frame Mounted Reservoir 25 gal.
Capacity
Capacity*20,000 lbs. Distributed on Full Length of Bed
Dimensions
Deck Rating14,000 lbs. in 16′
Loaded Deck Height10-7/8″ above Truck Frame
Width102″
DeckingFlat Deck – 1/8” Steel Tread Plate (Smooth Side Up) Over Steel Tubes
Frame
Main Sub-FrameTube Type – Full length w full length slide pads – dual lift cylinders – Positive Lock Down
CL 20 – 23′ Steel10 Ton
CL 20 – 25′ Steel10 Ton
General
Bed Main LongitudinalFabricated “H” Beam 80,000 Yield Flanges, 80,000 Yield Webs
Crossmembers3″ JR. I-Beam on 8″ centers
Bed Outer RailFormed 5/16″ Steel Channel with Built-In Skid Plate for Containers
Approach PlateBeveled with 4 Double Chain Keyhole Tiedowns (Front/rear), Container Shoe slot each side
BulkheadBed Mounted
Tie DownsGotchas on side of Outer Rail 24″ centers, 4 Double Keyhole Gotchas on Approach Plate
Container GuidesFront Container Side Lock Pins with 3/8” x 2-1/2” Toe Board
Powder Coat ColorWhite, Black, Yellow, Blue, Red, Green, Metallic Gray, Sapphire Blue
DecalsHigh-Visibility Reflective Package
Storage RackBulkhead mounted. For Accessory Package.
Accessory PackageBoom, Shovel, Pry Bar
Accessory Safety Package(8) Traffic Cones with (2) Storage Racks mounted each side of Winch
Container Tie Down Package(1) 16′ 3/8″ Chain, (1) 4′ 3/8″ Chain (G70) with Hooks Both Ends, (2) 3/8″ Ratchet Binders
Stabilizer LegManual Adjust
Stabilizer Leg in lieu of StandardHydraulic Adjust and Extend
Hot Dip Galvanized SubFrame only
ModelCapacity*
CertificationsCage Code — 65459; Small Business NAICS Codes — 336211, 336413, 333111, 333924, 336212 Copyright © 2026 Landoll Company, LLC. All Rights Reserved.
Electrical
LightsIndustry Best Grote LED Lighting with Oven Annealed Markers (Up to a 10-year warranty)
Wiring HarnessIndustry Best Grote Xtreme Harnessing (7-year warranty)
Spare Light Package3 amber, 2 red, 1 back up, 1 stop/tail turn
Finish
FinishSteel Grit Shot Blast to Bright Metal
Paint over GalvanizedSides (Outside bed rails only)
Controls
Wireless Remote ControlSix function

Landoll Trailers

Manufacturer of traveling axle trailers and extendable detachable gooseneck lowboys.

Marysville, KansasFounded 1963
(469) 421-3536